C1255

EBCM Internal Malfunction (ABS Disabled):

CIRCUIT DESCRIPTION
This DTC identifies a malfunction within the EBCM.

CONDITIONS FOR RUNNING THE DTC
The ABS conditions are normal.

CONDITIONS FOR SETTING THE DTC
An internal EBCM malfunction exists.

ACTION TAKEN WHEN THE DTC SETS
^ ABS is disabled.
^ The ABS warning indicator turns ON.

CONDITIONS FOR CLEARING THE DTC
^ The condition responsible for setting the DTC no longer exists and the Scan Tool Clear DTCs function is used.
^ 100 drive cycles pass with no DTCs detected. A drive cycle consists of starting the vehicle, driving the vehicle over 16 km/h (10 mph), stopping and then turning the ignition OFF.

DIAGNOSTIC AIDS
Inspect that the EBCM to BPMV connection is secure, tight, and free from corrosion.