Disabling

1. Turn the steering wheel so that the vehicle's wheels are pointing straight ahead.
2. Turn OFF the ignition.
3. Remove the key from the ignition switch.

IMPORTANT: With the AIR BAG fuse removed and the ignition switch in the RUN position, The AIR BAG warning lamp illuminates. This is normal operation, and does not indicate an SIR system malfunction.

4. Remove the AIR BAG Fuse from the fuse block.
5. Remove the Connector Position Assurance (CPA) (1) from the driver yellow 2-way connector (2) located at the base of the steering column.
6. Disconnect the driver yellow 2-way connector (2) located at the base of the steering column.




7. Remove the connector position assurance (CPA) (2) from the passenger (IP) yellow 2-way connector (1) located behind the glove box (3).
8. Disconnect the passenger (IP) yellow 2-way connector (1) located behind the glove box (3).




9. Remove the connector position assurance (CPA) from the driver side air bag yellow 2-way connector (2) located under the driver seat.
10. Disconnect the driver side air bag yellow 2-way connector (1) located under the driver seat.
11. Remove the connector position assurance (CPA) from the passenger side. air bag yellow 2-way connector (2) located under the passenger seat.
12. Disconnect the passenger side air bag yellow 2-way connector (1) located under the passenger seat.