Radio Frequency Preset Push Buttons

1. Up to 21 stations (7 AM, 7 FM1, and 7 FM2 stations) can be preset into the radio's memory.
2. In order to preset 4 AM, 4 FM1, and 4 FM2 stations, perform the following steps:
2.1. Tune into the desired radio station
2.2. Press the SET push button.
Set will appear on the display.
2.3. Press a station push button.

The SET on the display will go out. The radio will then tune into the selected station whenever that push button is pressed.
1. If electrical power is interrupted (by an open fuse, discharged battery, service procedure, etc.), the station(s) and time of day must be reset.
2. In order to preset 3 additional AM, FM1, and FM2 stations, perform the following steps:
2.1. Tune into the desired radio station.
2.2. Press the SET push button. SET will appear on the display.
2.3. Press any 2 station adjacent push buttons at the same time.
The SET on the display will go out.
The station will return when the same 2 push buttons are pressed again.

UM6: For a description of the RPO Code(s) shown in this article, refer to the RPO Code List found at Vehicle/Application and ID RPO Codes