Fog Lamp Replacement - Front (Xtreme Only)

REMOVAL PROCEDURE
1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
2. Ensure that the fog lamp switch is in the OFF position.
3. Disconnect the electrical connector.
4. Remove the pushpins.
5. Remove the adjustment screw.
6. Remove the fog lamp from the vehicle.

INSTALLATION PROCEDURE
1. Install the fog lamp to the vehicle.
2. Install the adjustment screws.
3. Install the pushpins.
4. Connect the electrical connector.
5. Lower the vehicle.
6. Realm the fog lights. Refer to Fog Lamp Aiming Procedure