4-Door

REMOVAL PROCEDURE




1. Open the rear door.
2. Remove the 2 plastic retainers and the high mounted stoplamp cover (2) from the high mounted stoplamp.




3. Disconnect the high mounted stoplamp electrical connector (2).
4. Remove the following components from the vehicle:
4.1. The 2 screws (1)
4.2. The high mounted stoplamp (3)
5. Remove the bulb sockets (4) from the stoplamp (3).
6. Remove the bulbs from the sockets (4), if necessary.

INSTALLATION PROCEDURE




1. Install the bulbs to the sockets (4), if removed.
2. Install the bulb sockets (4) to the high mounted stoplamp (3).
3. Install the high mounted stoplamp (3) to the rear door. Secure the stoplamp with the 2 screws (1).
4. Connect the high mounted stoplamp electrical connector (2).




5. Install the high mounted stoplamp cover (2) to the stoplamp. Secure the cover with the 2 plastic retainers.
6. Close the rear door.