Flash-to-Pass System Operation

The Flash-to-Pass feature allows the driver to signal the driver of another vehicle of his intention to pass. This is achieved by pulling the lever toward the driver, which will cause the high beam operation to illuminate until the lever is released. The flash-to-pass feature will function with the switch lever in either the OFF, the parklamp, or the low-beam headlamp setting.

With the dimmer switch in the pass position, the high beam filaments in the headlamps ground through the dimmer switch to G200. The high beam filaments will light with ground supplied. The ground path for the high beam indicator is the same as the high beam filaments.