Crankshaft Position Sensor: Service and Repair
CRANKSHAFT POSITION (CKP) SENSOR REPLACEMENTREMOVAL PROCEDURE
CAUTION: Refer to Vehicle Lifting Caution in Service Precautions.
1. Raise the vehicle on a hoist.
2. Disconnect the Crankshaft Position (CKP) sensor electrical connector (2).
3. Remove the CKP sensor retaining bolt (3).
4. Remove the CKP sensor (1).
INSTALLATION PROCEDURE
1. Install the CKP sensor (1) into the oil pan.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the retaining bolt (3).
Tighten
Tighten the retaining bolt to 6 N.m (54 lb in).
3. Reconnect the CKP sensor electrical connector (2).
4. Lower the vehicle.