Dome Lamp Replacement

Dome Lamp Replacement

Removal Procedure




1. Remove the lens (5).
2. Remove the bulb (2).
3. Remove the housing screws (6).
4. Remove the lamp assembly (4).
5. Disconnect the electrical connector (1).
6. Remove the bezel (3).

Installation Procedure




1. Install the bezel (3).
2. Connect the electrical connector (1).
3. Install the lamp assembly (4).

Notice: Refer to Fastener Notice in Cautions and Notices.

4. Install the housing screws (6).

Tighten the screws to 2 Nm (18 lb in).

5. Install the bulb (2).
6. Install the lens (5).