Lock Housing Assembly - Disassemble - Off Vehicle

Lock Housing Assembly - Disassemble - Off Vehicle




1. Remove the steering column lock cylinder set. Refer to Steering Column Lock Cylinder Set - Disassemble - Off Vehicle Steering Column Lock Cylinder Set - Disassemble - Off Vehicle.

Important: For standard columns, proceed to step 10.


2. Remove the upper bearing inner race seat (1).
3. Remove the inner race (2).




4. Remove 3 pan head 6 lobe soc tap screws (1) from the lock housing cover assembly.




5. Remove the lock housing cover assembly (1).
6. Remove the column housing cover end cap (2).
7. Remove the dimmer switch rod actuator (3) from the lock housing cover assembly (1).




8. Remove the switch actuator pivot pin (2) from the windshield wiper and washer switch assembly (1).
9. Remove the lock housing cover assembly.




10. Remove 4 hex washer head screws (3) from the steering column housing assembly (1).
11. Remove the thrust washer (2) from the steering shaft assembly.
12. Remove the steering column housing assembly (1).




13. Remove the switch actuator pivot pin (2) from the windshield wiper and washer switch assembly (1).