86. Engine Flywheel Installation - Auto Trans

Engine Flywheel Installation with AT)





Important: Make sure the flywheel is installed correctly. Engine Side is stamped on the flywheel to assist with installation.

1. Install the engine flywheel.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the engine flywheel bolts.
- Tighten the engine flywheel bolts to 40 Nm (30 lb ft) for the first pass.
- Tighten the engine flywheel bolts to 80 Nm (59 lb ft) for the second pass.
- Tighten the engine flywheel bolts to 100 Nm (74 lb ft) for the final pass.