Compact Disc Player Operation

This CD player plays only 120-mm (4.75-in) discs. Only use CDs with this symbol: COMPACT DISC DIGITAL AUDIO. If you insert any other disc, you may damage the CD player or the disc. Do not use 76-mm (3-in) discs. The discs are called CD singles.

Compact Disc Player Errors
ERR indicates an error, and the compact disc cannot play temporarily. The following conditions could cause the error:
^ The road is too rough. Play the disc when the road is smoother.
^ The disc is dirty, scratched, or wet.
^ The disc is upside down.
^ The air is very humid. If the air is humid, wait an hour.

Recall
Press the RCL/TUNE knob with a disc playing in order to toggle the following displays:
1. The clock
2. The CD message
3. The track that is currently playing
4. The elapsed time of the track that is playing

Pressing the knob once will change the display from the clock to the CD mode. Pressing the knob a second time within 2 seconds will change the display from the CD to the track number that is currently being played. Pressing the knob a third time within approximately 2 seconds will change the display again. The display changes from the track number that is currently being played to the elapsed time of that track number. If the knob is not pressed an additional time in 2 seconds, the display automatically will change modes. After approximately 5 seconds, the display will return to the clock.

Previous Track
If you press preset button 1 (PREV) once, the following actions will occur:
1. The sound will mute.
2. The CD player will move to the beginning of the previous track. For the correct operation of the previous selection function, the current track must have been playing for more than 10 seconds. If the current track has been playing for less than 10 seconds, then the CD will move to the beginning of the current track.

If you hold the button, or if you press the button more than once, the CD player will proceed through further tracks. The CD player will cycle backward if you hold the button. Each time you press and release the button, the CD player will move forward one track. The track number will appear on the display.

Next Track
If you press preset button 2 (NEXT) once, the following actions will occur:
1. The sound will mute.
2. The CD player will move to the beginning of the next track. For the correct operation of the next selection function, the current track must have been playing for more than 10 seconds. If the current track has been playing for less than 10 seconds, then the CD will move to the beginning of the current track.

If you hold the button, or if you press the button more than once, the CD player will proceed through further tracks. The CD player will cycle backward if you hold the button. Each time you press and release the button, the CD player will move forward one track. The track number will appear on the display.

Reverse
If you press preset button 3 (REV) once, the disc will rapidly return to a favorite passage. The current selection will remain audible at a lower sound level during the reverse mode. If you release the button, the CD player will play the passage at that point at normal sound. If you reach the beginning of the current selection, the previous selection will start.

Forward
If you press preset button 4 (FWD) once, the disc will advance quickly within a track. The current selection will remain audible at a lower sound level during the forward mode. If you release the button, the CD player will play the passage at that point at normal sound. If you reach the end of the current selection, the next selection will start.

Random Play
If you press preset button 5 (RDM) once, the CD player will play tracks in a random order. This feature will cancel if you press any of the following buttons:
^ The preset button 1 (PREV) that will play the previous selection to the track which was playing before the random mode began
^ The preset button 2 (NEXT) that will play the next selection to the track which was playing before the random mode began
^ The preset button 5 (RDM)
^ Preset button 6 (RPT)

The letters RND will appear on the display if this feature is active.

Repeat
If you press preset button 6 (RPT) once, the CD player will repeat a selection after the selection is finished playing. This feature will cancel if you press any of the following buttons:
^ The preset button 1 (PREV)
^ The preset button 2 (NEXT)
^ The preset button 5 (RDM)
^ The preset button 6 (RPT)
^ The AM/FM button

The letters RPT will appear on the display if this feature is active.

Cancel CD and Play Radio
If you press the AM/FM button while in the CD mode, you will cancel the CD operation. The unit will return to radio operation. In order to return to the CD mode, press the CD button.

Eject
The elect button has an up arrow and a line at the bottom. Press the eject button with the ignition switch in the ACC position or in the ON position in order to perform the following functions:
1. Eject the CD.
2. Change the sound to the radio, if the radio is turned on.

The CD player will start playing track 1 if the disc is inserted again. If the ignition switch is turned off, the elect function will still operate. The radio will remain off.