Stop Lamps and Center High-Mounted Stop Lamp

The high-mounted stop lamp contains 1 bulb on 2-door models and attaches to the top of the endgate. The high-mounted stop lamp contains 5 bulbs on 4-door models and is located at the top of the rear door window.

Each of the tail lamps also contains a double filament stop lamp bulb. The stop lamp filament lights under the following conditions:
- The stop lamp switch is closed. The stop lamp is designed to operate in conjunction with the tail lamps whenever the brake pedal is depressed.
- The parking lamps are activated.
- The headlamps are activated.

Voltage applies at all times through the STOP fuse to the normally open contacts of the stop lamp switch. When the brake pedal is depressed, the contact in the stop lamp switch close. The voltage applies to the tail/stop lamps in the left and right tail lamps and the center high-mounted stop lamp. The lamps are grounded to G400 and G401. The stop lamps will operate even with the tail lamps on.