Luggage Carrier Replacement

LUGGAGE CARRIER REPLACEMENT

REMOVAL PROCEDURE




1. Depress the tabs and remove rear rail covers (2).
2. Remove the rear support retainers.
3. Remove the rear supports and gaskets from the roof (3).




4. Unlock the cross rails (2).
5. Slide the rear and front cross rails from the carrier assembly (1).
6. Remove the retainers from the side rails.
7. Remove the side rail assemblies from the roof.

INSTALLATION PROCEDURE




1. Install the side rail assemblies (1) to the roof and align to the existing Welnuts.
2. Install the retainers to the side rails and hand tighten.
3. Torque the side rail retainers in this order.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the side rail retainers to 2 N.m (20 lb in).

3.1. Torque the second hole from the front.
3.2. Torque the first hole.
3.3. Torque the third and forth holes.




4. Install the front cross rail assembly (2) to the side rails (1), stopping at the second or third notch from the front of each rail.
5. Depress the adjuster handles to lock each side.
6. Install the rear cross rail to the side rails, stopping at the second or third engagement notch.
7. Depress the adjuster handle to lock each side.




8. Install the rear rail covers (2) by inserting the legs of the cover and rotating cover down to engage the retainer.