Service Procedure

Important
To ensure proper adhesion of the label, the interior temperature of the vehicle must be at least 50°F (11°C).

1. Use a clean, dry cloth to dust/clean off the driver's sun visor.

2. Firmly hold the label and peel the protective liner from the backside of the label, being careful not to touch or contaminate the adhesive by allowing dirt or any foreign matter to come in contact with it.

3. Carefully align the new label to cover the old label and smooth down, especially around the edges. Apply pressure for approximately 3 to 5 seconds.

4. Repeat Steps 1 though 3 on the passenger's sun visor.