30000 MI or 48000 KM
InspectUniversal Joint, Drive/Propeller Shaft
Inspect for looseness and damage every 15,000 miles or 15 months whichever occurs first. Inspect more frequently if used off-road or for pulling a trailer. Tighten U-joint flange bolts if necessary.
Ignition Coil
Inspect plug cap.
Fuel Tank
Inspect fuel tank, cap and lines for damage or leaks. Inspect fuel cap gasket for any damage. Replace parts as needed.
Fuel Supply Line
Inspect fuel tank, cap and lines for damage or leaks. Inspect fuel cap gasket for any damage. Replace parts as needed.
Fuel Filler Cap
Inspect fuel tank, cap and lines for damage or leaks. Inspect fuel cap gasket for any damage. Replace parts as needed.
Drive/Propeller Shaft
Inspect for looseness and damage every 15,000 miles or 15 months whichever occurs first. Inspect more frequently if used off-road or for pulling a trailer.
Drive Belt
Inspect engine accessory drive belts every 30,000 miles or 24 months whichever occurs first.
Brakes and Traction Control
Inspect the complete system. Inspect brake lines and hoses for proper hookup, binding, leaks, cracks, chafing, etc. Inspect disc pads for wear and rotors for surface condition. Also inspect drum brake linings for wear and cracks. Inspect other brake parts including drums, wheel cylinders, calipers, parking brake, etc. Check parking brake adjustment. A good time to check the brakes is when the wheels are removed for tire rotation. Brakes may need to be inspected more often if driving habits or conditions result in frequent braking.
Replace
Oil Filter, Engine
Change oil and filter every 7500 miles or 7.5 months, whichever occurs first.
Fuel Filter
Replace every 30,000 miles or 30 months whichever occurs first. Replace sooner if clogged.
Fluid - M/T
Fluid - Differential
Engine Oil
Change oil and filter every 7500 miles or 7.5 months, whichever occurs first.
Cabin Air Filter / Purifier
Air Filter Element
Rotate
Tires
Flush
Cooling System
Drain, flush and refill cooling system every 30,000 miles or 30 months whichever occurs first. Clean radiator, condensor, pressure cap and neck. Pressure test the cooling system and pressure cap.