Compressor Mounting Bracket Replacement

COMPRESSOR MOUNTING BRACKET REPLACEMENT

REMOVAL PROCEDURE
1. Remove the compressor from the vehicle.




2. Remove the compressor mounting bracket bolts (1, 2, and 3) from the engine.
3. Remove the compressor mounting bracket from the engine.

INSTALLATION PROCEDURE




1. Install the compressor mounting bracket to the engine.
2. Install the compressor mounting bracket bolts (1, 2, and 3) to the engine.

Tighten the bolts (1, 2, and 3) in sequence, to 50 N.m (37 lb ft).

NOTE: Refer to Fastener Notice in Service Precautions.

3. Install the compressor to the vehicle.