Shift Indicator - A/T: Service and Repair

Shift Indicator Replacement
Removal Procedure
1. Remove the center trim bezel.





2. Remove the screws holding the shift indicator to the center console trim bezel and disconnect the electrical connector.





3. Remove the shift indicator from the center trim bezel.

Installation Procedure





1. Notice: Refer to Fastener Notice in Service Precautions.

Align the shift indicator with the center trim bezel and fasten with the screws.
^ Tighten the screws to 2 Nm (18 inch lbs.).
2. Connect the electrical connection to the center trim bezel.
3. Attach the center trim bezel to the center stack. Verify proper operation.