B1517
DTC B1517
CIRCUIT DESCRIPTION
The roof door module (RDM) has 2 separate 12-volt reference voltage circuits. They supply a reference voltage to various roof position sensors on one circuit and the power window motors with the other.
DTC DESCRIPTOR
This diagnostic procedure supports the following DTC:
DTC B1517 Battery {single or 1} Voltage
CONDITIONS FOR RUNNING THE DTC
- Battery voltage between 9-16 volts
- The roof and windows may be active or inactive
CONDITIONS FOR SETTING THE DTC
The DTC will set when the RDM senses a short to ground on either 12-volt reference voltage circuit.
ACTION TAKEN WHEN THE DTC SETS
The RDM cannot properly control the power roof or the power windows.
CONDITIONS FOR CLEARING THE DTC
- When the fault is no longer present, the RDM will change the current DTC to a history DTC.
- The RDM will clear the history DTC after 50 fault free ignition cycles.
- A current or history DTC can also be cleared using a scan tool.
TEST
