Energy Storage Box (ESB) Fuse Holder Replacement

ENERGY STORAGE BOX (ESB) FUSE HOLDER REPLACEMENT

REMOVAL PROCEDURE




1. Remove the maxi-fuse.
2. Remove the fuse power cable from the fuse holder.
3. Remove the service disconnect power cable from the fuse holder.
4. Remove the fuse holder screws.
5. Remove the fuse holder.

INSTALLATION PROCEDURE




1. Install the fuse holder.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the fuse holder screws.

Tighten the screws to 2 N.m (18 lb in).

3. Install the service disconnect power cable to the fuse holder.
4. Install the fuse power cable to the fuse holder.
5. Install the maxi-fuse.