Energy Storage Box (ESB) Power Cable Replacement - Battery 2 to Battery 3

ENERGY STORAGE BOX (ESB) POWER CABLE REPLACEMENT - BATTERY 2 TO BATTERY 3

REMOVAL PROCEDURE




1. Remove the energy storage box (ESB) intermediate cover.
2. Cut the tie straps (1) securing the power cable to the ESB.
3. Remove the power cable nuts (3) from battery 2 and battery 3.
4. Remove the power cable (2) from battery 2 and battery 3.

INSTALLATION PROCEDURE




1. Install the power cable (2) battery 2 and battery 3.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the power cable nuts (3) to battery 2 and battery 3.

Tighten the nuts to 10 N.m (89 lb in).

3. Install NEW tie straps (1) in order to secure the power cable to the ESB.
4. Install the ESB intermediate cover.