Energy Storage Box (ESB) Maxi-Fuse Replacement

ENERGY STORAGE BOX (ESB) MAXI-FUSE REPLACEMENT

REMOVAL PROCEDURE




1. Remove the energy storage box (ESB) intermediate cover.
2. Remove the maxi-fuse cover.




3. Remove the maxi-fuse nuts (1).
4. Remove the maxi-fuse (2).

INSTALLATION PROCEDURE




1. Install the maxi-fuse (2).

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the maxi-fuse nuts (1).

Tighten the nuts to 10 N.m (89 lb in).




3. Install the maxi-fuse cover.
4. Install the ESB intermediate cover.