Energy Storage Box (ESB) Service Disconnect/Connect

ENERGY STORAGE BOX (ESB) SERVICE DISCONNECT/CONNECT

DISCONNECT PROCEDURE




1. Disconnect the negative battery cable.
2. Open the rear door.
3. Remove the energy storage box (ESB) access panel.




4. Rotate the battery disconnect key to the horizontal position.




5. Raise the rear seat.
6. Remove the plastic retainers from the ESB trim cover (1).
7. Remove the ESB trim cover.




8. Disconnect the 42-volt positive/negative cable electrical connector (4).

CONNECT PROCEDURE




1. Connect the 42-volt positive/negative cable electrical connector (4).




2. Install the ESB trim cover.
3. Install the plastic retainers to the ESB trim cover (1).
4. Lower the rear seat.




5. Rotate the battery disconnect key to the vertical position.




6. Install the ESB access panel.
7. Close the rear door.
8. Connect the negative battery cable.