Cabin Temperature Sensor / Switch: Service and Repair

INSIDE AIR TEMPERATURE SENSOR ASSEMBLY REPLACEMENT

REMOVAL PROCEDURE
1. Remove the upper portion of the left center trim pillar.

IMPORTANT: Recline the driver seat rearward to access the left center trim pillar.




2. Disconnect the electrical connector.
3. Remove the retaining clips from the B pillar.
4. Remove the inside air temperature sensor assembly (1) from the B pillar.

INSTALLATION PROCEDURE




1. Connect the electrical connector to the inside air temperature sensor assembly (1).
2. Install the inside air temperature sensor assembly (1) to the B pillar.
3. Install the retaining clips to the B pillar.
4. Install the upper portion of the left center trim pillar.