Driver/Vehicle Information Display: Service and Repair

DRIVER INFORMATION CENTER REPLACEMENT

REMOVAL PROCEDURE
1. Remove the overhead console.




2. Remove the driver information display to overhead console screws.
3. Remove the driver information display from the overhead console.

INSTALLATION PROCEDURE




1. Install the driver information display to overhead console.
2. Install the driver information display to overhead console screws.

Tighten the screws to 1 N.m (9 lb in).

NOTE: Refer to Fastener Notice in Service Precautions.

3. Install the overhead console.
4. Calibrate the compass. Refer to Electronic Compass Calibration .