Seat Trim Replacement - Side

Seat Trim Replacement - Side

Removal Procedure

1. Remove the cup holder, if equipped. Refer to Cupholder Replacement - Rear Seat (Cupholder Replacement - Rear Seat) .
2. Remove the finish cover screws.
3. Remove the finish covers from the seat frame.



Installation Procedure

1. Install the finish covers to the seat frame.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the finish cover screws.

Tighten the screws to 2 N.m (18 lb in).

3. Install the cup holder, if equipped. Refer to Cupholder Replacement - Rear Seat (Cupholder Replacement - Rear Seat) .