Energy Storage Box (ESB) HVAC Outlet Adapter Replacement

ENERGY STORAGE BOX (ESB) HVAC OUTLET ADAPTER REPLACEMENT

CAUTION:
- To reduce the risk of severe shock and burns, disable the 42 volt (42V) system anytime you perform service work on or around the energy storage box (ESB). The 42V system will still be active after you have disabled the ESB.
- To reduce the risk of severe shock and burns, always disconnect the 42 volt (42V) energy storage box (ESB) before doing any work to the ESB system. To disconnect the ESB, turn the engine off and turn OFF the service disconnect switch, which is located on the passenger side of the ESB.

REMOVAL PROCEDURE




1. Remove the energy storage box (ESB) carrier (3).
2. Disconnect the heating, ventilation, and air conditioning (HVAC) outlet adapter (2) from the ESB carrier.
3. Disconnect the HVAC outlet adapter from the vehicle body (1).
4. Remove the HVAC outlet adapter.

INSTALLATION PROCEDURE




1. Install the HVAC outlet adapter.
2. Connect the HVAC outlet adapter to the vehicle body (1).
3. Connect the HVAC outlet adapter (2) to the ESB carrier.
4. Install the ESB carrier (3).