| Standard Hours | Manufacturer Warranty Hours | Skill Level | Notes |
| Replace |
| Front Axle | 0.6 | 0.5 | B | |
| NOTE |
| To R&R Universal Joints, Add |
| Each | 0.5 | 0.0 | B | |
| With Transfer Case Shield, Add | 0.2 | 0.2 | B | |
| To R&R Slip Joint, Add | 0.1 | 0.1 | B | |
| To R&R Front Driveshaft Flange, Add | 0.2 | 0.2 | B | |
| To R&R Rear Support Yoke, Add | 0.1 | 0.1 | B | |
| To R&R Link Yoke, Add | 0.1 | 0.1 | B | |
| To R&R Transfer Case Output Yoke, Add | 0.1 | 0.1 | B | |
| Rear Axle |
| One Piece Shaft | 0.4 | 0.3 | B | |
| Two Piece Shaft |
| Front | 0.5 | 0.4 | B | |
| Rear | 0.4 | 0.3 | B | |
| NOTE |
| With Non-Slip Yoke, Add | 0.1 | 0.1 | B | |
| To R&R Center Support Bearing, Add | 0.4 | 0.3 | B | |
| To R&R Universal Joints, Add |
| Each | 0.5 | 0.0 | B | |