Passenger Knee Bolster Bracket Replacement

Passenger Knee Bolster Bracket Replacement

Removal Procedure

Caution: Refer to Restraint System Service Precautions.




1. Remove the knee bolster trim panel.
2. Remove the body control module (BCM).
3. Remove the nuts (1) securing the knee bolster bracket to the instrument panel (I/P).
4. Remove the knee bolster bracket (2).

Installation Procedure




1. Align the knee bolster bracket (2) to the I/P.

Notice: Refer to Fastener Notice.

2. Install the nuts (1).

Tighten the nuts (1) to 10 N.m (88 lb in).

3. Install the knee bolster trim panel.
4. Install the body control module.