B0058

DTC B0058

Diagnostic Instructions

* Perform the Diagnostic System Check - Vehicle prior to using this diagnostic procedure. Initial Inspection and Diagnostic Overview
* Review Strategy Based Diagnosis for an overview of the diagnostic approach.
* Diagnostic Procedure Instructions provides an overview of each diagnostic category.

DTC Descriptor

DTC B0058 00
- Passenger Pretensioner Suppressed

Circuit/System Description

The inflatable restraint sensing and diagnostic module (SDM) will set DTC B0058 00 when a pretensioner deployment has been commanded but the passenger seat belt pretensioner is suppressed. The seat belt pretensioner can be suppressed at the request of the passenger presence system.

Conditions for Running the DTC

This DTC is set when a pretensioner deployment has been commanded and the passenger seat belt pretensioner has been suppressed.

Action Taken When the DTC Sets

* The SDM sets a DTC B0058.
* The SDM commands ON the AIR BAG warning lamp via serial data communications.
* DTC B0052, B0053, or B0055 will set along with this DTC.

Circuit/System Verification

1. Verify DTC B0052, B0053, or B0055 is not set.

• If DTC is set, refer to the Diagnostic Trouble Code (DTC) List - Vehicle. Diagnostic Trouble Code Descriptions

2. With a scan tool, clear DTCs. Verify DTC B0085 is not set.

• If DTC is set, replace the SDM.

Repair Instructions

Perform the Diagnostic Repair Verification after completing the diagnostic procedure. Verification Tests

SIR/SRS Wiring Repairs