Knee Bolster Replacement

Knee Bolster Replacement

Removal Procedure





1. Remove the I/P cluster trim plate bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement .




2. Remove the knee bolster screws.
3. Unsnap the top of the knee bolster from the I/P assembly.



Installation Procedure





1. Snap the top of the knee bolster into the I/P assembly.
Notice: Refer to Fastener Notice .


2. Install the knee bolster screws.

Tighten the screws to 2 N.m (18 lb in).

3. Install the I/P cluster trim plate bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement .