Transfer Case Rear Output Shaft Speed Sensor Replacement - Left Side

Transfer Case Rear Output Shaft Speed Sensor Replacement - Left Side

Removal Procedure




1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Disconnect the left rear speed sensor electrical connector (4).




3. Remove the left rear speed sensor.

Installation Procedure





Notice: Refer to Fastener Notice.

1. Install the left rear speed sensor.

Tighten the speed sensor to 15 N.m (11 lb ft).




2. Connect the left rear speed sensor electrical connector (4).
3. Lower the vehicle.