B0931

DTC B0931

DTC Descriptor

DTC B0931
- Compass Sensor Circuit

Diagnostic Fault Information

Perform the Diagnostic System Check - Vehicle prior to using this diagnostic procedure. Initial Inspection and Diagnostic Overview

Circuit Description

The internal fault detection of the compass is handled by the instrument panel cluster (IPC).

Conditions for Running the DTC

The IPC monitors the analog input value at power up.

Conditions for Setting the DTC

The IPC does not detect the compass sensor. This may be due to a faulty sensor.

Action Taken When the DTC Sets

The DTC will be set and stored in non-volatile memory.

Conditions for Clearing the DTC

* The DTC becomes history when the driver information center (DIC) no longer detects a failure.
* The history DTC clears after 100 fault-free ignition cycles.
* The DIC receives the clear code command from the scan tool.

Circuit/System Testing

Ignition ON, verify with a scan tool that the DTC is a history DTC.

If not a history DTC, test or replace the IPC

Repair Instructions

Perform the Diagnostic Repair Verification after completing the diagnostic procedure. Verification Tests

Programming and Relearning for IPC setup, and programming. Programming and Relearning