DTC 013
DTC 013
Circuit Description
The automatic level control sensor, monitors the body to suspension height and detects when it is out of range.
DTC Descriptor
This diagnostic procedure supports the following DTC:
DTC 013 Level Control Sensor Circuit
Conditions for Running the DTC
The ignition is ON.
Conditions for Setting the DTC
When the automatic level control sensor detects body to suspension height is out of voltage range (0.5-4.5 volts) for at least 1 second.
Action Taken When the DTC Sets
* Leveling functions are disabled.
* The accessory inflator function continues to operate.
Conditions for Clearing the DTC
The conditions that caused the DTC to set have been removed.
Diagnostic Aids
* This DTC is set when ride height is physically being held out of range.
* This DTC can set when the sensor link is damaged or detached.
Test Description
The numbers below refer to the step numbers on the diagnostic table.
2. This step tests for mechanical damage to automatic level control sensor link.
3. Automatic level control sensor replacement.
