Endgate Assist Handle Replacement (Avalanche)

Endgate Assist Handle Replacement (Avalanche)

Removal Procedure

1. Open the cargo box stowage lid.




2. Remove the retaining bolts (1) from the assist handle (2).
3. Remove the assist handle from the endgate.

Installation Procedure




1. Install the assist handle (2) to the endgate cap.

Notice: Refer to Fastener Notice.

2. Install the bolts (1) to the assist handle in order to attach the assist handle to the endgate cap.

Tighten the bolts to 9 N.m (80 lb in).

3. Close the cargo box stowage lid.