Engine Coolant Temperature Gage Inaccurate or Inoperative

Engine Coolant Temperature Gage Inaccurate or Inoperative

Diagnostic Instructions

* Perform the Diagnostic System Check - Vehicle prior to using the diagnostic procedure. Initial Inspection and Diagnostic Overview
* Review Strategy Based Diagnosis for an overview of the diagnostic approach.
* Diagnostic Procedure Instructions provides an overview of each diagnostic category.

Circuit/System Description

The instrument panel cluster (IPC) displays the engine coolant temperature as determined by the engine control module (ECM)/powertrain control module (PCM). The PCM/ECM sends the temperature data via serial data to the IPC in order to display the engine temperature.

Circuit/System Verification

Ignition ON, perform the engine coolant gage sweep test with the scan tool.

If the engine coolant gage does not sweep from its low to high position, replace the IPC.

Repair Instructions

Perform the Diagnostic Repair Verification after completing the diagnostic procedure. Verification Tests