Blower Motor Relay: Service and Repair

Auxiliary Blower Motor Relay Replacement

Removal Procedure

1. Remove the left lower quarter trim panel. Refer to Rear Quarter Trim Panel Replacement - Right Side (Service and Repair).
2. Disconnect blower motor relay electrical connector.
3. Remove the blower motor relay bolts/screws.
4. Remove the blower motor relay.

Installation Procedure

1. Install the blower motor relay.
2. Connect the blower motor relay electrical connector.

Notice: Refer to Fastener Notice (Fastener Notice).

3. Install the blower motor relay bolts/screws.

The bolts/screws to 1.6 N.m (14 lb in).

4. Install the left lower quarter trim panel. Refer to Rear Quarter Trim Panel Replacement - Right Side (Service and Repair).