Rear Wheel Speed Sensor Replacement

Rear Wheel Speed Sensor Replacement

Removal Procedure

Important: The rear wheel speed sensors and rings are integral with the hub and bearing assemblies.


If a speed sensor or a ring needs replacement, replace the entire hub and bearing assembly.


Remove the hub and bearing assembly. Refer to Rear Wheel Bearing and Hub Replacement (Without Independent Suspension) (Rear Suspension).

Installation Procedure

1. Install the hub and bearing assembly to the vehicle. Refer to Rear Wheel Bearing and Hub Replacement (Without Independent Suspension) (Rear Suspension).
2. Turn the ignition switch to the ON position, with the engine OFF.
3. Perform the diagnostic system check. Refer to Diagnostic System Check - Vehicle (Initial Inspection and Diagnostic Overview).