Brake Rotor/Disc
Front BrakesRotor Thickness NEW 32.2�mm (1.27�in)
Rotor Discard Thickness* 30.7�mm (1.21�in)
Rotor Maximum Allowable Assembled Lateral Runout 0.06�mm (0.002�in)
Rotor Maximum Allowable Scoring 1.50�mm (0.059�in)
Rotor Maximum Allowable Thickness Variation 0.025�mm (0.001�in)
Rotor Minimum Allowable Thickness After Refinish 31.08�mm (1.22�in)
Rear Brakes
Rotor Thickness NEW 12.0�mm (0.472�in)
Rotor Discard Thickness* 10.5�mm (0.413�in)
Rotor Maximum Allowable Assembled Lateral Runout 0.06�mm (0.002�in)
Rotor Maximum Allowable Scoring 1.50�mm (0.059�in)
Rotor Maximum Allowable Thickness Variation 0.025�mm (0.001�in)
Rotor Minimum Allowable Thickness After Refinish 10.8�mm (0.425�in)
* All brake rotors have a discard dimension cast into them. Replace any rotor that does not meet this specification. After refinishing the rotor, replace any rotor that does not meet the minimum thickness specifications.