P0700

DTC P0700

Diagnostic Instructions

* Perform theDiagnostic System Check - Vehicle (Initial Inspection and Diagnostic Overview) prior to using this diagnostic procedure.
* ReviewStrategy Based Diagnosis (Initial Inspection and Diagnostic Overview) for an overview of the diagnostic approach.
* Diagnostic Procedure Instructions (Initial Inspection and Diagnostic Overview) provides an overview of each diagnostic category.



DTC Descriptor
DTC P0700
- Transmission Control Module (TCM) Requested MIL Illumination




Circuit/System Description

This diagnostic trouble code (DTC) indicates that an emission related transmission DTC has set in the transmission control module (TCM). The engine control module (ECM) turns ON the malfunction indicator lamp (MIL) when the TCM sends a message over the serial data circuit requesting MIL illumination.


Conditions for Running the DTC

* The ignition is ON.
* DTC P0700 runs continuously.



Conditions for Setting the DTC

Serial Data communication from the TCM indicates a fault exists with the transmission.


Action Taken When the DTC Sets

DTC P0700 is a Type A DTC.


Conditions for Clearing the MIL/DTC

DTC P0700 is a Type A DTC.


Reference Information
DTC Type Reference

Powertrain Diagnostic Trouble Code (DTC) Type Definitions (Diagnostic Trouble Code Descriptions)


Circuit/System Verification

1. DTC P0700 is an informational DTC. There should be no engine controls DTCs.

• If any engine control DTCs are set, refer toDiagnostic Trouble Code (DTC) List - Vehicle (Diagnostic Trouble Code Descriptions) .

2. For diagnosis of TCM DTCs, refer toDiagnostic Trouble Code (DTC) List - Vehicle (Diagnostic Trouble Code Descriptions) .
3. Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.



Repair Instructions

Perform theDiagnostic Repair Verification (Verification Tests) after completing the diagnostic procedure.