With Automatic Transmission

Engine Flywheel Installation (Automatic Transmission)

Special Tools
* J 43653 - Flywheel Holding Tool
* J 45059 - Angle Meter

For equivalent regional tools, refer to Special Tools (Tools and Equipment)




1. Install the flywheel (1).
2. Install the NEW bolts.
3. Install J 43653 - tool in the starter assembly location, engaging the flywheel, in order to prevent crankshaft rotation.

Caution: Refer to Fastener Caution (Fastener Caution).

4. Tighten the flywheel bolts to 53 Nm (39 lb ft), plus 25 degrees , using J 45059 - meter.