Reaction Sun Gear Shell, Reaction Carrier Shaft, Input Internal Gear, and Input Carrier Assembly Removal

Reaction Sun Gear Shell, Reaction Carrier Shaft, Input Internal Gear, and Input Carrier Assembly Removal





Important:
The output shaft retainer ring (661) can not be reused, it must be replaced.


1. Use snap ring pliers to remove the output shaft retainer ring (661).





Important:
The carrier assembly (662) can be a 4 or 5 pinion design depending on transmission model.


2. Remove the input carrier assembly (662) and remove the thrust bearing assembly (663).





3. Remove the input internal gear (664) and the reaction carrier shaft assembly (666).





4. Remove the thrust washer (669) and the reaction sun shell (670).