Seats: Service and Repair

Rear Seat Cushion:

REAR SEAT CUSHION
Cushion removal is accomplished by pushing one side of the cushion rearward approximately 4 cm (1.5 inches), then lifting straight up to free the retainer from the floor pan bracket. Repeat this operation on the other side of the cushion and remove the cushion from the vehicle.

Installation is accomplished by inserting the rear edge of the cushion under the rear seat back and engaging the cushion retainers into the floor pan brackets.

Rear Seat Back:

REAR SEAT BACK
Rear seat backs are retained by two screws to the floor pan. Refer to the figure above for the location of these screws.