Fog/Driving Lamp: Service and Repair

Fog Light - Removal And Installation:

REMOVE
3. Fog light
4. Sealing cover
5. Bulb

INSTALL
3. Bulb
4. Sealing cover
5. Fog light

REMOVAL SERVICE POINT
Bulb Removal

Bulb Removal:

Remove the bulb attaching spring and pull out the bulb.

Bulb Removal:

CAUTION: Do not touch the surface of the bulb with hands or dirty gloves. If the surface does become dirty, clean it with alcohol or thinner, and let it dry thoroughly before installing.


INSTALLATION SERVICE POINT
Sealing Cover Installation
Install the sealing cover securely.

CAUTION: If the sealing cover is not securely installed, the lens will be out of focus, or water will get inside the light unit.