On Vehicle Service

TIRE INFLATION PRESSURE CHECK





NOTE: Refer to the inflation pressure label on the driver's side door.

TIRE WEAR CHECK





Measure the tread depth of tires.

Limit: 1.6 mm (0.06 inch)

If the remaining tread depth is less than the limit, replace the tire.

NOTE: When the tread depth of tires is reduced to 1.6 mm (0.06 inch) or less, wear indicators will appear.

WHEEL RUNOUT CHECK





Jack up the vehicle so that the wheels are clear of the floor. While slowly turning the wheel, measure wheel runout with a dial indicator.

Limit: Radial and lateral runout
1.2 mm (0.05 inch) or less (Steel wheel)
1.0 mm (0.04 inch) or less (Aluminum wheel)

If wheel runout exceeds the limit, replace the wheel.