Midline/Infinity I System Replacement

REMOVAL
1. Open hood and disconnect the negative battery cable remote terminal from the remote battery post.
2. Remove right under panel silencer/duct.
3. Remove two retaining nuts to remote amplifier.
4. Pull amplifier inboard and then pull downward to remove from upper retaining clips.
5. Disconnect two wiring connectors.
6. Remove remote amplifier from vehicle.

INSTALLATION
1. Install the remote amplifier into vehicle.
2. Connect two wiring connectors.
3. Push the amplifier upward and then outboard to install into upper retaining clips.
4. Install two retaining nuts to remote amplifier.
5. Install right under panel silencer/duct.
6. Connect the negative battery cable remote terminal to the remote battery post.