Operation CHARM: Car repair manuals for everyone.

Solenoid/Pressure Switch Assembly

SOLENOID/PRESSURE SWITCH ASSY
REMOVAL

NOTE: If the Solenoid/Pressure Switch Assembly is being replaced, the Quick Learn Procedure must be performed.

(1) Raise vehicle on hoist.
(2) Remove valve body assembly from transaxle.





(3) Remove Solenoid/Pressure Switch Assembly retaining screws from solenoid (Fig. 352).





(4) Remove Solenoid/Pressure Switch Assembly and screen from valve body (Fig. 353).

INSTALLATION

NOTE: If the Solenoid/Pressure Switch assembly is being replaced, the Quick Learn Procedure must be performed.
(1) Install Solenoid/Pressure Switch Assembly and screen to the separator and transfer plates (Fig. 353).
(2) Install and tighten retaining screws (Fig. 352) to 6 Nm (35 inch lbs.) torque.
(3) Install valve body.