Radio/Stereo: Service and Repair

REMOVAL
1. Open hood and disconnect the negative battery cable remote terminal from the remote battery post.
2. Remove instrument panel center trim bezel.
3. Remove four radio mounting screws.
4. Pull radio from panel and disconnect wiring, ground strap, wires and antenna lead from radio.
5. Remove radio from vehicle.

INSTALLATION
1. Place radio near instrument panel opening.
2. Connect wiring, ground strap, wires and antenna lead to radio and slide into place.
3. Install four radio mounting screws.
4. Install instrument panel center trim bezel.
5. Connect the negative battery cable remote terminal to the remote battery post.