B1A24

B1A24-KEY NOT PROGRAMMED

WHEN MONITORED
With the ignition switch on.

POSSIBLE CAUSES
- Key not programmed
- SKREEM

DIAGNOSTIC TEST

1. KEY NOT PROGRAMMED
Turn the ignition on.
Using a scan tool, attempt to program the key(s) into the SKREEM.

Q: Was the programming of the key(s) successful?

YES: Programming of the key(s) were successful. Test complete. Perform SKREEM VERIFICATION TEST. Vehicle Theft Security Verification Tests
NO: Replace the ignition key and attempt to program it into the SKREEM. If the DTC resets, replace and program the SKREEM. Perform SKREEM VERIFICATION TEST. Vehicle Theft Security Verification Tests