B1D62

B1D62-POWER SEAT SWITCH STUCK

WHEN MONITORED
Continuously

SET CONDITION
When the Memory Seat Module detects the switch engaged in an active position for over 50 seconds, this code will set.

POSSIBLE CAUSES
- Driver seat switch

DIAGNOSTIC TEST

1. TEST FOR INTERMITTENT CONDITION
Turn the ignition on.
With the scan tool, record and erase DTC's
Press the Seat Switch in all directions several times.
Wait one minute.
With the scan tool, read DTC's.

Q: Does the scan tool display B1D62-POWER SEAT SWITCH STUCK?

YES: Replace the Driver Seat Switch as necessary. Perform POWER SEAT SYSTEM VERIFICATION TEST - VER 1. Power Seat System Verification Test
NO: The conditions that caused this code to set are not present at this time. Using the wiring diagram/schematic as a guide, inspect the wiring and connectors. Perform POWER SEAT SYSTEM VERIFICATION TEST - VER 1. Power Seat System Verification Test