B2215

B2215-FRONT CONTROL MODULE INTERNAL

WHEN MONITORED
Continuously.

SET CONDITION
The Front Control Module detects an internal fault.

POSSIBLE CAUSES
- Front control module

DIAGNOSTIC TEST

1. REPLACE THE FRONT CONTROL MODULE IF DTC IS ACTIVE
With the scan tool, read the active FCM DTC's.

Q: Does the scan tool display this DTC as active?

YES: Replace and program the Front Control Module. Perform BODY VERIFICATION TEST - VER 1. Body Verification Test
NO: If the DTC is stored, check for an intermittent condition. Visually inspect the related wiring harness connectors. Look for broken, bent, pushed out, or corroded terminals.